Remote Technologies ESC2+

Power +5VDC, 1.0A
Serial (RS-232) Ports Two, RJ45
Includes two RJ-45 to DB9 adapters
Ethernet Port One, RJ-45
Enclosure ABS Plastic
Mounting Wall-mount or free standing
Dimensions (H x W x D) W/tabs 2.8” (71mm) x 1.8” (45mm) x 1.0” (25mm)
Operating Temperature +32°F to +122°F
(0°C to +50°C)
Operating Humidity 5% to 95% non-condensing
Weight 1.7oz (50g)
Warranty Three Years (Parts & Labor)
Prop 65 Warning WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Provides two additional serial ports to an RTI control processor.
Use multiple ESC-2+ modules for virtually unlimited control of serial devices.
Capable of two-way serial communication.
Integrates seamlessly into Integration Designer.
Can be discovered and configured by Integration Designer over Ethernet.
Easy wiring to devices using cat-5 cable – Includes two RJ-45 to DB9 serial adapters.
Reset button allows ESC-2+ to be set back to factory defaults.

The second generation ESC-2+ Ethernet to Serial Converter provides a convenient way to add two RS-232 ports to an RTI XP series control processor. Wire the ESC-2+ to the local Ethernet network for full two-way control, as if the device was wired directly to the control processor. Two built-in RJ-45 jacks and the included RJ-45 to DB9 adapters allow Cat-5 cabling between the ESC-2+ and the device being controlled.* This allows full RS-232 control virtually anywhere there is access to an Ethernet network connection. The ESC-2+ model includes a reset button, which allows the unit to be set back to default settings.

*NOTE: Cabling from the ESC-2+ to the device being controlled is limited to 30-70 feet depending on baud rate and other factors.