Kanto Installer Series RCAD380

• TV Sizes: 40 to 90
• Weight Allowance: 125 lb (57 kg)
• VESA Sizes: 100100 to 700400
• Wall Plate: 27 (68.5 cm); Accommodates dual studs with up to 24 spacing
• Shipping box weight: 27.6 lb (12.5 kg)
• Shipping box dimensions: 29.6 x 12.8 x 4.3 (75.2 x 32.5 x 11 cm)
• Product weight: 22.3 lb (10.1 kg)

• The unique design of the PDX680 allows your TV to sit 2 inches from the wall when fully pushed in.
• The H Frame mounting bracket accommodates VESA sizes from 100100 to 700400. The mounting arms come with plenty of options to raise or lower the TV depending on the VESA pattern on the TV.
• Magnetic covers go over the lag bolts to give the wall plate an elegant look. Remove the covers when you install or remove the wall plate from the wall.
• Even with its low-profile design the PDX680 can extend 24 from the wall, giving you plenty of room for tilting and swiveling your TV, or for reaching out from alcoves.
• Designed with strength in mind, the PDX680s solid steel frame can hold up to 125 lb (57 kg) with no concern, even at full extension.
• The articulating arms on the PDX680 allow for a maximum of 170 degrees (with a 40 TV). The larger the TV, the less swivel the PDX680 will have
• The accessible tilt mechanism makes it easy to angle your TV 15° forward or 3° backward. Once youve found the best viewing angle, tighten the nuts to secure your TV in place.
• Four cable management raceways are attached to the bottom of the wishbone arms. These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides whatever works best.

Full Motion TV Mount

RCAD380

Meet RCAD380, the standard in full motion mounts from Kanto. Sitting a mere 2 from the wall and extending up to 24, the RCAD380is the perfect solution for versatility. PDX680 offers 18° of tilt and a 27 wall plate to accommodate up to 24 studs. With integrated cable management and plastic caps to hide the lag bolts in the wall, the RCAD380is not only functional, but easy on the eyes too.