AVPro Edge AC-MX-44

Video:

• Video Resolutions Up to 4k 60HZ 4:4:4
• VESA Resolutions Up to DCI 4k (4096×2160) 5k (Up to 5120×3200)
• HDR Formats/Resolutions 420, 422, 444 (10 and 12 Deep Color) HDR10, HDR10+, Dolby Vision, HLG 
• Color Space YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500)
• Chroma Subsampling 4:4:4, 4:2:2, 4:2:0 Supported
• Deep Color Up to 16 bit (1080), up to 12 BIT (4k)

Audio:

• Audio Formats Supported HDMI PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos
• Audio Formats Supported Extracted (TOSLINK) PCM 2.0 Ch, LPCM 6 CH, LPCM 7 CH, Dolby Digital, Dolby Digital Plus
• Audio Formats Supported Extracted (2CH Port) PCM 2 CH
• Audio Extraction Location Follows OUTPUT (Selectable) 

Distance:

• HDMI IN/OUT (4K60 4:4:4) Up to 50 Feet (Using Bullet Train HDMI)
• HDMI IN/OUT (W/ AOC Cable) (4k60 4:4:4) Up to 130 Feet (Using Bullet Train AOC)

Other:

• Bandwidth18 GBPS
• HDCP HDCP 2.3 and Earlier 

Control:

• Ports LAN, RS232, IR Window
• Drivers C4, RTI, ELAN, CRESTRON, URC (For More Information – See Drivers Page on AVProEdge.com/Drivers
• LAN Web OS YES

Ports:

• HDMI  Type A
• LAN RJ45 w/ Web Interface/ Control
• Audio (Extracted Digital) Toslink
• Audio (Extracted Analog) L/R Audio
• IR RX Window Only (Remote Included)
• RS232 3 Pin Terminal Block

Environmental:

• Operating Temperature 23 to 125°F (-5 to 51°C)
• Storage Temperature -4 to 140°F (-20 to 60°C)
• Humidity Range 5-90% RH (No Condensation)

Power:

• Power Consumption (Total) 7 Watts Max
• Power Supply – Matrix Input: AC 100-240V ~ 50/60Hz Output: DC 5V 2A  

Dimensions:

• Dimensions (Unit Only – Height/Depth/Width) mm: 44.45 x 225.43 x 438.15 in: 1.75 x 8.875 x 17.25
• Dimensions (Packaged Height/Depth/Width) mm: 88.9 x 336.55 x 495.3 in: 3.5 x 13.25 x 19.5
• Rack Units 1 Unit
• Weight (Unit) 6.2 lbs (2.81 Kg)
• Weight (Packaged) 8.32 lbs (3.78 Kg)

*Specifications subject to change without notice. Mass & dimensions are approximate

• Dolby Vision, HDR10+ and HLG Support
• HDCP 2.3 (and all earlier versions supported)
• 4K > 1080p Down Scalers on each output
• Advanced EDID Management
• IR, RS-232 and LAN Control Options
• Digital Toslink Out (7CH PCM, DD, DTS)
• Balanced Analog Out (2CH PCM)
• Audio Delay for Digital & Analog Out
• HDBaseT Compatibility mode for mixed systems
• Driver Support For Crestron, C4, RTI, ELAN and more
• Extracted Audio Now Has 3 Operating Modes. Bound to Input, Bound to Output, or Independent Matrix
• Built in Test Pattern on Each Output to Verify Infrastructure

• HDMI 2.0(a/b)
• 18Gbps Bandwidth Support
• 4K60 4:4:4 Support
• Full HDR Support (HDR 10 & 12 Bit)

18Gbps 4×4 HDMI Matrix Switch

AC-MX-44

The AC-MX-44 is a 4×4 HDMI matrix switch that supports HDMI 2.0(a/b), HDCP 2.3, up to 4K video resolution, and up to 18Gbps bandwidth. Audio Delay is On-Board so integrators can manage lip-sync issues before they become a problem. Video signal management is also possible with built-in scalers. In addition to scalers, this matrix supports complete EDID management, allowing maximum flexibility with todays broad range of sources and displays. The AC-MX-44 also features the AVPro Edge User Interface (AEUI). We built the AEUI from scratch for our integrators with the technology they requested.

Our best developers have been hard at work bringing our integrators an easy-to-use web based user interface that allows them to set up, troubleshoot, and control this 4K 4×4. The AVPro Edge user interface (AEUI) allows for easy configuration and sets up the 4K 4×4. This matrix switcher also comes with a screen on the unit that can tell you the IP address for connecting directly to your control system. From built-in scaling to complete EDID control and configuring, you can customize every aspect of this device to work perfectly for your system.

• Cutsheet
• Manual