Home / Shop All / Audio / 8 ohm Amplifiers / AudioControl RS 500

AudioControl RS 500

SKU: AUD-ACP-RS-500

MPN: ACP-RS-500

Description

500w DSP Subwoofer Amplifier 8ohm 1U Balanced XLR Inputs 2ohm Stable

Add to Wishlist

Send to a friend!

INPUTS

Audio Inputs: 1 Balanced, 2 Unbalanced, 1 LFE, 2 Speaker-Level
Nominal sensitivity: 0.5V to 4V (user selectable)
Signal to Noise (A-wtd ref full output): 98 dB
Frequency Response: 15 Hz 350 Hz

CONTROL

Remote Power Trigger: +12 VDC or Dry Contact Closure
Network Connection/Protocol: 10BaseT Ethernet TCP/IP
Communication Protocol: HTTP or Telnet
12 Volt Trigger Outputs: 1
IR Receiver Inputs: 1

OUTPUTS

Amplifier Channels: 1
Continuous power output: 500W
Minimum Speaker Load: 2O
Loop/Thru Audio Outputs: 1 Balanced, 2 Unbalanced, 1 LFE
Total Harmonic Distortion: 0.1%

WEIGHT & DIMENSIONS

Dimensions (including terminals and feet): 17 W x 17.5 D x 1.75 H (1 U)
Weight: 14.9 lbs. (6.8 kg)

IN THE BOX

RS 500, power cord, rack mounting brackets, user manual, warranty

500 Watts into 8, 4, or 2 Ohms
Digital Signal Processing (DSP) Performance
Six-band Graphic EQ
Eight-band Parametric EQ
Variable Crossover with protective Subsonic Filter
Downloadable Speaker Optimization Profiles
Ethernet Port for Status Monitoring, Source Switching, and 12 Volt Trigger Control
Network Programmable Graphic & Parametric Equalization with User Memories
Digital Signal Sense
AudioControl LightDrive Anti-Clipping Speaker Protection
Balanced Input/Thru Output
Unbalanced Inputs/Thru Output
LFE Input/Thru Output
Speaker-Level Inputs
12 Volt Triggerable
5-Way Binding Posts
Perfect for Home and Commercial Installations

Number of Channels:
1
Watts Per Channel:
301-500
Brand:
AudioControl

500W Subwoofer Amplifier with DSP

RS 500

The AudioControl RS 500 DSP-controlled subwoofer amplifier is the ultimate bass amplification solution for any home cinema, multi-zone audio, or 2.1-channel music system.

RS Series amplifiers deliver continuous power into speaker loads from 2 to 8 ohms, and like many AudioControl amplifiers, the RS series offers IP or IR control, plus looped outputs with an optional high-pass filter.

The power of AudioControls multi-award-winning DSP engine, coupled with features such as graphic equalization, parametric equalization, high/low filter cutoff, and incremental signal phase with delay compensation, put precise calibration and fine-tuning control at your fingertips for accurate, authoritative bass response. RS Series amplifiers are the definitive choice to power passive subwoofers in entertainment systems that demand the very best.