Home / Shop All / Media Distribution / Dante Distribution / AudioControl DANTE™ Decoder

AudioControl DANTE™ Decoder

SKU: AUD-ACP-DANTE-D-POE

MPN: ACP-DANTE-D-POE

Description

Dante Audio Decoder with RJ45 input, and RCA L & R channel outputs, powered by POE or USB-C connection

Add to Wishlist

Send to a friend!

AUDIO

Frequency Response 20-20kHz
Analog Input Voltage Balanced or Unbalanced 1VRMS (2.828VP-P) at 0 dBFS
Format LPCM
Supported Sample Rates 44.1kHz, 48kHz, 88.2kHz, 96kHz
Supported Bit Depths16, 24, 32
Latency Configurable 1, 2, 5ms

AUDIO CONNECTIONS

Analog Output 1x Stereo RCA
Dante Network Audio1x RJ-45

POWER

USB Type-C Power Adapter
Input: 100-240VAC, 50/60Hz, 0.5A
Output: 5VDC, 1A
PoE via RJ45 Power over Ethernet

ENVIRONMENTAL

Operating Temperature 23°F (-5°C) to 125°F (51°C)
Storage Temperature -4°F (-20°C) to 140°F (60°C)
Humidity Range 5% to 90% RH (no condensation)

DIMENSIONS

Mounting Furniture Mount Support
Height x Width x Depth (Single Unit) Millimeters: 110 x 96 x 25 Inches: 4.33 x 3.78 x 1
Height x Width x Depth (Packaged Unit) Millimeters: 193 x 136 x 41 Inches: 7.6 x 5.35 x 1.62
Weight (Single Unit )0.5 lbs (0.23 kg)
Weight (Packaged Unit)0.85 lbs (0.38 kg)
Product Warranty 5 Years

PoE or PSU powered
Accepts all Dante-platform and AES67 multicast audio signals up to a 96 kHz sampling rate and 32-bit resolution
100% lossless, accurate full frequency response decoding accuracy
May be paired with the AudioControl AC-DANTE-E-POE encoder for a stand-alone, long-distance audio transmission system

Type:
Decoder / Receiver
Brand:
AudioControl

2-Channel Analog Audio Output DANTE™ Decoder

DANTE™ Decoder

The ultra-compact AudioControl ACP-DANTE-D-POE is a two-channel, 100% lossless, Dante™ network audio decoder for Dante or AES67 audio streams. Industry-standard sampling rates from 44.1 kHz to as high as 96 kHz in 16-, 24-, or 32-bit word lengths are accurately converted back into an analog waveform.

PoE capability and a compact form factor enable the ACP-DANTE-D-POE to be powered remotely for strategic placement near endpoint components. Any AVPro Edge MXnet 1G PoE switch may be used stand-alone or configured for Dante network traffic, providing a transfer distance of up to 100 meters (328 feet) with correctly implemented CAT5e or CAT6A infrastructure.

Dante Controller, downloadable free from Audinate, is required to perform initial configuration, encoding parameters, Dante stream subscriptions, network settings, and AES67 audio support adjustments. For static installations, these may be set-and-forget adjustments. When powered and connected to a Dante network, the ACP-DANTE-D-POE is auto-discovered for easy identification.