Home / Shop All / Commercial AV / DSPs & Mixers / Atlas IED TSD-MIX32RL

Atlas IED TSD-MIX32RL

SKU: ATS-TSD-MIX32RL

MPN: TSD-MIX32RL

UPC: 612079189458

Description

3x2 Stereo Line Mixer with Remote Level RCA Inputs Balanced and Unbalanced Outputs Power Supply Sold Separately

Add to Wishlist

Send to a friend!

Unbalanced Line Input 300mV (-10dB)
Maximum Input Signal 1.5V (3dBV)
THD .06% @ 1kHz
Signal to Noise Ratio Line to Line: 85dBV
Balanced Output Impedance 300O
Unbalanced Output Impedance 150O
Power Consumption 60mA
Power Consumption 1.4W
Maximum Output Balanced/Unbalanced 5V (14dBV)
Frequency Response 20Hz – 20kHz (±1dB)
Voltage 24VDC, 60mA
Height 1.5″ (39mm)
Width 4″ (101mm)
Depth 2.75″ (70mm)
Voltage Compatibility 24V
Warranty Period 36 months from date of purchase

Three Stereo Unbalanced Line Inputs, One Set of RCA and Two 3.5mm
Balanced Line Outputs Left & Right
Unbalanced Line Outputs Left & Right
Base & Treble Controls ±6dB
Remote Master Level Control
High Gain Output for Driving Long Balanced Lines
Input Signal Indicator LEDs, Qty 3
Output Peak & Signal Indicator LEDs
Separate Ground Connections

Brand:
Atlas

3×2 Stereo Line Mixer with Remote Level

TSD-MIX32RL

The AtlasIED TSD-MIX32RL is a 3×2 stereo line mixer with Remote level control. It is ideal for applications where multiple stereo line sources need to be combined into a preamp utilizing the local or remote Master level control. The unit can be easily interfaced with AtlasIED amplifiers. Applications include restaurants, conference rooms, and schools.

Additional on board EQ can be done utilizing the Base control (100Hz ±6db) and Treble control (10kHz ±6dB). The TSD-MIX32RL uses high quality, low noise components to ensure clarity and quiet operation without unwanted coloration.

The TSD-MIX32RL is highly efficient and meets most energy standards as one 24VDC power supply (available separately) can power multiple Atlas Time Saving Devices. Unit requires Power Supply that is sold separately for proper function, multiple TSDs can be powered with one power supply based on current requirements. This unit has a power requirement of 60mA so any of the available power supplies can be used with this unit. For multiple TSD applications use the TSD Power Calculator to determine the proper power supply needed.