Home / Shop All / Surveillance / Accessories / Altronix Pace1PTM

Altronix Pace1PTM

SKU: ALT-PACE1PTM

MPN: PACE1PTM

Description

100Mbps Long-Range PoE+ Transceiver Only Tx 500m 30w Budget Requires Compatible Receiver Rx Unit

Add to Wishlist

Send to a friend!

Input

PoE (15W) IEEE 802.3af compliant or PoE+ (30W) IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.

Ethernet

Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5e or a single twisted pair UTP.
Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM.
Throughput is rated to pass 100Mbps of data.

UTP (single twisted pair) from Receiver to Pace1PTM

Distance: up to 152m @ 100Mbps.

CAT5e or Higher from Receiver to Pace1PTM

Distance: up to 500m @ 100Mbps.

LED Indicators

Green – PoE ON (by respective RJ45 jack).
Yellow and Green LED IP Link status, 10/100Base-T/active.

Environmental

Operating Temperature:

For 15W: – 40° C to 75° C ( – 40° F to 167° F).
For 25W: – 40° C to 70° C ( – 40° F to 158° F).
For 30W: – 40° C to 60° C ( – 40° F to 140° F).
Storage Temperature: – 40° F to 167° F ( – 40° C to 75° C).
Relative humidity: 20 to 85%, non-condensing.

Operating Altitude

-304.8 to 2000m.

Functions

Auto detection and protection of legacy non-PoE cameras/devices.

1-Port Long-Range Ethernet PoE+ Transceiver

Pace1PTM

The Pace1PTM is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100Mbps full duplex and power via a single twisted pair (UTP) (when paired with Pace1PRM) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PTM will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) (when paired with Pace1PRM) or structured cable.