Home / Shop All / Media Distribution / Media over IP / Blustream IP250UHD-RX

Blustream IP250UHD-RX

SKU: BLU-IP250UHD-RX

MPN: IP250UHD-RX

Description

Multicast VoIP UHD Receiver Rx with Dante 4K 30 4:2:0 1Gb Network

Add to Wishlist

Send to a friend!

Video Input Connectors: 1 x LAN RJ45 connector
Video Output Connectors: 1 x HDMI Type A, female
Latency: 1 Frame (16-33ms depending on frame rate)
Audio input: 1 x Optical (S/PDIF)
Audio Output Connectors: 1 x 5-pin Phoenix connector
Ethernet port: 2 x LAN RJ45 connector
Fiber Port: 1 x SFP connector (fiber module not supplied)
RS-232 serial port: 1 x 3-pin Phoenix connector
USB/KVM Port: 2 x USB-Type A
IR Input ports: 1 x 3.5mm stereo jack
IR Output ports: 1 x 3.5mm mono jack
PoE draw: 8.0W (typical), 9.2W (max load)
Firmware Update: 1 x Micro-USB
Mounting kit included

Advanced UHD video over 1Gb Managed Network
Operates as a stand-alone system, or together with existing IP200UHD products
Virtually unlimited system size
Extends HDMI and Dante up to a distance of 100m over a single CAT cable
Dual RJ45 network ports configurable for independent or combined HDMI and Dante signal distribution
SFP port for independent or combined HDMI and Dante signal distribution over a single fiber cable
Video up-scaling and down-scaling
Supports up to 4K 30Hz UHD video output
In-built 2ch Dante transmitter for breakout of audio from HDMI source or local analog audio input
In-built 2ch Dante receiver for embedding of audio onto the HDMI signal or breakout to local analog audio output
Optical (S/PDIF) audio input for conversion of digital audio format onto Dante audio system
Analog L/R audio outputs support both balanced and unbalanced audio signals
Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
Advanced signal management for independent routing of IR, RS-232, USB/KVM*, audio and video
OLED front panel display for advanced system information and manual configuration
PoE (Power over Ethernet) to power Blustream products from PoE switch
HDCP 2.2 compliant with advanced EDID management
Local 24V 1A power supply should Ethernet switch not support PoE (not included)
Features 4 operational modes:
– Matrix distribution (requires 1Gb network switch)
– Video wall (requires 1Gb network switch)
– One-to-one HDMI extender (no network switch required)
– One-to-many HDMI extender (no network switch required)

*USB connectivity for IP200 series products only supports bulk mode cameras, and will not support isochronous USB data transfer for VC equipment / cameras.

*Compatible IP Controllers: ACM200, ACM210

Type:
Decoder / Receiver
Bandwidth:
1Gbs
Brand:
Blustream
Source:
HDMI

IP Multicast UHD Video Receiver over 1Gb Network featuring Dante® Integration

IP250UHD-RX

Our UHD Multicast distribution platform allows virtually latency free (1 frame) distribution of HDMI video over a 1Gb Network.

Compatible with the current IP200 platform, the IP250UHD-RX is an industry leading 4K HDCP 2.2 HDMI video scaling receiver that, using visually lossless compression technology, delivers HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture, or greater distances using the in-built Fiber SFP port.

The IP250UHD-RX features dual RJ45 network ports for independent or combined HDMI and/or Dante signal distribution.

The unit can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available, the Multicast solution is ideal for both commercial and residential installations.