Videofied IUT601

Panel Compatibility Videofied Alarm Panel XL,XT,XTIP, VISIO
Power requirements:
Type: C – 3.6v SAFT Lithium, LS14500, AA Batteries Only
Nominal Voltage: 3.6v
Low Voltage Limit: 2.7v
Current Consumption:
Standby: 30uA
Max: 70mA
Quantity 1
Battery life (estimated) Up to 4 years
RF technology:
Protocol: 2 way S2
View© RSI Technologies
Operating Frequency: 915MHz/ frequency hopping
Radio type: Spread Spectrum Bidirectional RF
Transmission security: AES algorithm encryption
Supervision: Panel polls devices every 8 minutes
Antenna: Integrated
Tamper detection Wall and cover tampered
Operating temperature 14° – +104° F (-10° – +40° C)
Maximum relative humidity 75%, non-condensing
Maximum External Wire Length 16m/50 Feet Total, 20 Guage
External Input type NO or NC
Physical Data
Material ABS-ULVO
Dimensions 80mm x 35mm x 23mm
(LxWxD): 3 1/8 in. x 1 3/8 in. x 1in.
Weight 40g/1.4oz. (without batteries

Product Features:
Up to 4 years Lithium battery life
Temperature range: +14/+104°F (-10/+40°C)
Dual tamper provides detection for both wall and cover tamper
S2View® Spread Spectrum Ineractive AES Encrypted Wireless technology
Supervised – transmits a check-in/status signal every 8 minutes indicating detector state. tamper conditions, serial number, date of manufacture, software version and battery status.
External input – accepts Normally Closed and Normally Open dry circuits from standard hardwire intrusion devices, including fast repsonse devices.

The IUT universal transmitter is a wireless battery-powered device designed for use in Videofied® security systems. The IUT is used as an non powered open circuit detector linked to your standard hardwire detectors. The device allows integration into your Videofied® system with devices like PIR detectors, glass break detectors, thermal detectors, etc. The IUT is powered by a one lithium battery that can last up to four years, depending on the amount of detector activity. The IUT transmits a check-in signal every eight minutes that includes its unique identification code along with the current alarm state, tamper conditions, serial number, date of manufacture, software version and battery status..The IUT uses S2View® spread spectrum, Videofied, interactive, encrypted wireless circuitry for secure two-way communications with the control panel. A dual tamper function provides detection for both wall and cover tamper.