Vaddio 999-9570-000

This Package Includes:

• OneLINK HDMI Interface
• OneLINK HDMI EZIM with mounting screws
• Quick-start card
• 48V power supply with AC cord set(s)
• 1′ (0.3m) cat-5 cable, black
• 3′ (0.9m) cat-5 cable, black
• 3′ (0.3m) directional cat-5 cable for Cisco SX20**
• 1′ (0.3m) HDMI cable
• 3′ (0.9m) HDMI cable
• 1′ (0.3m) EIAJ-04 to EIAJ04 power cable for camera
• EZCamera RS-232 Control Adapter 998-1002-232 for Cisco codec serial 9-pin ports

** If connecting to a Cisco SX20 codec, a user-supplied Cisco CAB-PHD4XS2-SPLIT cable is required

For Cisco Telepresence SX20*, SX80 or C-Series codecs; compatible with legacy RoboSHOT 12 HDMI and RoboSHOT 30 HDMI cameras.

Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.

More Flexibility for Room Design and Installation

Tailored for Cisco codec systems and compatible with RoboSHOT HDMI cameras, this OneLINK codec kit provides more freedom of choice for camera selection and equipment placement.

• Simple, clutter-free camera extension with HDBaseT technology
• Power, video and control over a single Cat-5e cable up to 230 ft. (70m), or over a Cat-6 cable up to 328 ft. (100m)
• More flexibility in camera and/or codec placement no longer dependent on the location of the codec
• HDBaseT interface extends power, video and control up to 328 feet/100 meters Cisco systems can now go into larger rooms
• Plug and play usability
• Intuitive browser-based user interface for configuration and system administration

*Please note: When connecting a Cisco SX20 codec to a OneLINK HDMI, you will need to provide a Cisco CAB-PHD4XS2-SPLIT cable.

Cisco Codec Kit for OneLINK HDMI to RoboSHOT HDMI Cameras

999-9570-000

Extends power, video and control to your legacy RoboSHOT HDMI camera over a single category cable.Packaged for Cisco SX20*, SX80 or C-Series codecs; compatible with legacy RoboSHOT 12 HDMI and RoboSHOT 30 HDMI cameras.

Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.

• Quick Start Guide