Shure P300-IMX

Shure INTELLIMIXSpecs
Audio
Frequency Response
20 Hz to 20 kHz (+1, -1.5 dB)
Dante Digital Audio
Sampling Rate: 48 kHz
Bit Rate: 24 Bit
USB Audio
Sampling Rate: 48 kHz
Bit Rate: 24 / 16 Bit
Latency
Firmware 4.1 and Newer:
Dante 1-8 In to Dante Out (AEC enabled): 15.4 ms
Dante 1-8 In to Dante Out (AEC disabled): 8.7 ms
Dante 9-10 In to Dante Out: 3.4 ms
Analog In to Analog Out: 3.8 ms

Firmware 3.1 and Older:
Dante 1-8 In to Dante Out (AEC Enabled): 12.5 ms
Dante 1-8 In to Dante Out (AEC Disabled): 5.8 ms
Dante 9-10 In to Dante Out: 1.8 ms
Analog In to Analog Out: 2.2 ms
Acoustic Echo Cancelling
Tail Length: Up to 300 ms
Analog Connections
Block Connectors:

Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 113 dB, Dante to Analog: 117 dB

Equivalent Input Noise (20 Hz to 20 kHz, A-Weighted, Input Terminated with 150 Ohms):
Line -86 dBV, Aux -98 dBV

Total Harmonic Distortion at 1 kHz, 0 dBV Input, 0 dB Analog Gain: <0.05% Common Mode Rejection Ratio (150-Ohm Balanced Source @ 1 kHz): > 50 dB

Input Impedance: 9.6 Kilohms

Input Clipping Level: Line +27 dBV, Aux+15 dBV

Output Impedance: 80 Ohms

Output Clipping Level: Line +20 dBV, Aux +0 dBV, Mic -26 dBV
Mobile
Connector: 1/8″ / 3.5 mm

Pin Assignments: Tip: Audio Input (Left), Ring 1: Audio Input (Right), Ring 2: Ground, Sleeve: Audio Output (To Phone)

Dynamic Range (20 Hz to 20 kHz, A-Weighted, Typical): Analog to Dante: 99 dB, Dante to Analog: 90 dB

Total Harmonic Distortion (at 1 kHz, 0 dBV Input, 0 dB Analog Gain): <0.05% Input Impedance: 3.7 Kilohms Input Clipping Level: +4 dBV Output Impedance: 1.4 Kilohms Output Clipping Level (Output Terminated with 2.2 Kilohms): -20 dBV General Analog Input 2 x 3-Pin Block Connector (Active Balanced) 1 x 1/8" / 3.5mm TRRS Input Control Software Shure Designer Analog Output 2 x 3-Pin Block Connector (Impedance Balanced) USB USB 2.0, Type B Single Port Carries 2 Input and 2 Output Channels (Summed Mono) Network Connection 1 x RJ45 10 x Dante Inputs 8 x Dante Outputs Networking Cable Requirements: Cat 5e or Higher (Shielded Cable Recommended) Polarity Non-Inverting, Any Input to Any Output Power Requirements 802.3 at Type 2 (PoE Plus), Class 4 Power Consumption 17.5 W, Maximum Thermal Dissipation Maximum: 17.5 W (60 BTU/Hr) Typical: 14.6 W (50 BTU/Hr) Operating Temperature Range 20 to 122° F / -6.7 to 50° C Storage Temperature Range -20 to 165° F / -29 to 74° C Dimensions 1.6 x 8.3 x 8.9" / 4 x 21 x 22.6 cm Weight 3.8 lb / 1.71 kg Packaging Info Package Weight 5.6 lb Box Dimensions (LxWxH) 12.6 x 11.9 x 3.3"

Clear Audio for Conferences, Panels, and Meetings
Streamline the audio experience for every discussion. Fixed architecture provides simple setup, requiring less DSP programming and commissioning time. Multiple connectivity options allow for seamless integration with Shure conferencing microphones, laptops, and even mobile devices. Easy, rackless mounting enables quick, compact integration behind a display, under a table, or in a credenza.
Clever Operation
Intuitive, programming-free LED mute sync functionality with leading third-party software codecs including Zoom Rooms, Microsoft Teams and Skype for Business.
Scale Up
Easily add a presenter mic or control additional zoned loudspeakers with onboard matrix mixing for sound reinforcement applications
Connect with Confidence
Driverless USB audio connection to PCs for soft codecs. Analog I/O for hard codecs. 3.5 mm connection to mobile phones to bridge a remote caller. Design projects offline with Designer System Configuration Software for simple project management. Seamlessly compatible with Microflex Advance and Microflex Wireless conferencing microphones for a complete Shure ecosystem.
Meet In Confidence
Shure Audio Encryption utilizes AES-256 technology to protect confidential content.
Quality Details for Ease of Use
Compatible with Dante Domain Manager / Device Lock
Discretely mounts underneath a table or behind a display
Versatile connectivity and powerful DSP for AV conferencing
Easily setup and deploy settings with Designer System Configuration Software
Monitor and manage with SystemOn Audio Asset Management software
PoE+ powered eliminates the need for an outboard power supply

Key Features
Integrates Audio Sources for Conferences
Use with Microflex Advance/Wireless Mics
Use Phones, Video, Speakers & Computers
Versatile Connectivity, Powerful DSP
8-Channels with Echo Cancellation
Dante, Analog Block, 3.5mm & USB
Single Network Cable, PoE+

The Shure P300 IntelliMix Audio Conferencing Processor is designed to work with the Microflex Wireless (MXW) system to deliver eight channels of acoustic echo cancellation, DSP-processing, and level control for conference rooms and meeting spaces. The processor supports Microflex wireless microphones while also offering versatile input and output connectivity options that allows users to incorporate loudspeakers, computers, mobile devices, and other audio components.

The P300 provides Dante (10 in/8 out), and to connect analog devices, the unit provides two 3-pin block connector inputs and two 3-pin block connector outputs along with a 3.5mm input jack for mobile devices. The USB Type-B port lets you connect computers and other USB devices, while the RJ45 port supplies the unit with power and connects it to other access points in the conference system network.