Altelix NP17-SON1
SKU: ALX-NP17-SON1
MPN: NP17-SON1
Description
Weatherproof Enclosure for Sonos AMP with 120 VAC Outlets and Power Cord
Send to a friend!
SKU: ALX-NP17-SON1
MPN: NP17-SON1
Weatherproof Enclosure for Sonos AMP with 120 VAC Outlets and Power Cord
Send to a friend!
Securely Mount Your SONOS® AMP
The NP17-SON1 enclosure features a mounting system designed specifically for use with the SONOS® AMP to keep it securely mounted inside the enclosure. Easy to use, simply attach the included locking cam to the bottom of the SONOS® Amp, then slide the SONOS® AMP into the bracket until it locks into place. A release tab is provided to remove the SONOS® AMP from the bracket. Included in the accessory kit, a self-adhesive mirror can be attached to the inside of the enclosure to provide visibility to any controls and indicator lights on the installed equipment.
Plug and Play Setup
The NP17-SON1 enclosure provides easy plug-n-play installation. Once the SONOS® AMP is securely mounted inside the enclosure, connect its power cord to the internal 120VAC power outlet. A cable grommet and cable gland on the enclosure allows cables to be connected to the SONOS® AMP. Simply plug the enclosure’s 5 foot power cord into an outdoor outlet and you are up and running. This enclosure can be transitioned to hard-wired later if needed. The power cord can be removed and the power receptacle hard-wired by a qualified installer.
Cooling Fan Ventilation
The NP17-SON1 features dual vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for the SONOS® Amp. Rain shrouds on the front door keep rain water from entering the enclosure.
50W Thermostat Controlled Heater
For all weather operation the NP17H-SON1 is available with a 50W thermostat controlled heater in addition to the cooling fan. This heater generates a high air-current of warm air due to the design which supports natural convection. The internal design of this heater helps reduce the surface temperatures on the accessible sides of the housing. The heater turns on when the internal temperature reaches 41°F (5°C) and turns off when it rises to 59°F (15°C). The heater is mounted to a DIN rail in the enclosure lid and is wired internally leaving the power outlets available for the SONOS® Amp.
Complete with Cable Grommets and Wire Management Accessories
This enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more.
Multiple Enclosure Mounting Options
This enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation.
SONOS® and Connect:Amp™ are trademarks or registered trademarks of SONOS, Inc.
Altelix is excited to offer the newly redesigned NP17-SON1 enclosure for use with the SONOS® AMP. Some of the new features include:
Altelix
Plastic
NP17-SON1
Install Your SONOS® Amp Securely in Unattended Areas
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.