Lutron RRST-ANF-WH

• Amperage 1.5A Max
• Neutral Wire Required

RadioRA 3 Sunnata local controls include locator light to assist in locating the controls at night. RadioRA 3 Sunnata local controls install

in single pole or multi-location applications (fan control is single pole only). Sunnata companion dimmers and companion switches

must be used for multi-location control RadioRA 3 Sunnata local controls include a Front Accessible Service Switch (FASS) for safe light bulb replacement.

Use Lutron Designer (Claro gloss or satin finish) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro wallplates snap on with no visible means of attachment. Available colors are in the Colors and Finishes section on page 16 at the end of the cutsheet.

• Pressing the ON button, the fan to the previous speed
• Double-tapping anytime, the fan goes to high speed
• Fan speed can be adjusted by touching the light bar for one of the four speeds
• Neutral is required
• AC fan only
• Use to control one paddle-type ceiling fan
• Not for use with DC motor fans or fans with remote controls
• Not for use with bathroom or kitchen exhaust-type fans
• Not for use with Wi-Fi only fans.
• Not for use to control lighting loads on a fan.

RadioRA 3 RF Sunnata Fan Control

RRST-8ANF-WH

RadioRA 3 Sunnata local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched.

• Cutsheet
• Manual