AudioControl Architect P250 EQ

INPUTS

• Inputs: 1 Analog Stereo Main, 1 Digital Main (Coaxial / TOSLINK), 1 Analog SDS
• Analog Input Sensitivity: 1 Vrms for full output, level at maximum
• Gain: 27 dB

GENERAL

• Power Consumption (Standby): 1.5 W
• Power Consumption (Idle / All Channels Off): 18 W
• Power Consumption (All Channels Active): 24 W
• Power Consumption (loud listening level): 87 W
• Power Consumption (maximum): 591 W
• BTU/Hour Heat Dissipation (Standby): 5.1
• BTU/Hour Heat Dissipation (Idle / All Channels Off): 61
• BTU/Hour Heat Dissipation (All Channels Active): 82
• BTU/Hour Heat Dissipation (loud listening level): 108
• BTU/Hour Heat Dissipation (maximum): 268
• Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads

OUTPUTS

• Amplifier Channels: 2
• Power Output:
• 180 W per channel into 8 Ohms
• 250 W per channel at 4/2 Ohms
• 500 W Bridged Mono at 8/4 Ohms
• Minimum Speaker Load: 2 Ohms

WEIGHT & DIMENSIONS

• Dimensions: 19 W w/rack ears / 17 w/o rack ears x 13.5 D x 1.75 H (1 U)
• Weight: 15.0 lbs. (6.8 kg)

PERFORMANCE

• Frequency Response: ±0.25 dB, 20 Hz to 20 kHz, 8 O Load
• Signal to Noise: >110 dB, A-weighted, ref Full Output +/- 3db
• THD+N @ Rated Power:
• <1% @ 8 O per ch.
• <0.2% @ 4 O per ch.
• <0.07% @ 2 O per ch.
• Crosstalk: >80dB @ 1 kHz
• DAC Specs: 32 to 192 kHz sample rate, 16-/24-bit depth

IN THE BOX

• Architect Model P250 EQ, Power Cord, Manual, Warranty

CONTROL

• Remote Power Trigger: +12 VDC

• 2 channels
• 180 W per channel into 8 Ohms
• 250 W output into 4/2 Ohms
• 500 W bridged into 8/4 Ohms
• Input Prioritization & Signal Sense Switching
• Selectable EQ presets

SKU: ACP-AZ-P250

• 250 Watts Per Channel at 4/2 Ohms
• 180 Watts Per Channel at 8 Ohms
• 500 Watts at 8/4 Ohms Bridged
• High Current Design, 2 Ohm Stable
• LightDrive™ Anti-clipping Protection
• Stereo Coaxial and TOSLINK Digital inputs
• Stereo Coaxial Digital Loop Output
• Stereo Analog Input with Loop Output
• Signal Detection Switch Input
• Input Prioritization & Signal Sense Switching
• Selectable EQ Presets
• Shallow Mounting Depth (13.5)
• Compact 1U Design
• Unparalleled Energy Efficiency

2-Channel High-Current Amplifier with EQ

Architect P250 EQ

The Architect Model P250 EQ is a high-power, 2-channel amplifier engineered with an emphasis on sound quality to deliver clarity and tonally balanced sound into any loudspeaker. 

At only one rack space high, the P250 EQ delivers solid performance found in much larger solutions. Constructed with a high-current overbuilt power supply, an advanced filter stage, and fast-switching, impedance-matching output transistors, the P250EQ delivers 250 watts per channel into 4/2-ohm loads and 180 watts per channel into 8 ohms. The P250 EQ reproduces nuanced detail from any style of music with the power to control even the hardest to drive loudspeakers effortlessly.