Home / Shop All / Media Distribution / Dante Distribution / AudioControl eARC DANTE™ Encoder

AudioControl eARC DANTE™ Encoder

SKU: AUD-ACP-DANTE-ETV

MPN: ACP-DANTE-ETV

Description

eARC to Dante Encoder with HDMI and TOSLINK inputs, and a RJ45 Dante audio output, powered by POE or USB-C Connection

Add to Wishlist

Send to a friend!

AUDIO

Frequency Response 20-20kHz
Format LPCM
Supported Sample Rates 44.1kHz, 48kHz, 88.2kHz, 96kHz
Supported Bit Depths 16, 24, 32
LatencyConfigurable 1, 2, 5ms

AUDIO CONNECTIONS

EARC Input 1x HDMI
Digital Audio Input 1x Toslink
Dante Network Audio 1x RJ-45

POWER

USB Type-C
Power Adapter Input: 100-240VAC, 50/60Hz, 0.5A Output: 5VDC, 1A
PoE via RJ45 Power over Ethernet

ENVIRONMENTAL

Operating Temperature 23°F (-5°C) to 125°F (51°C)
Storage Temperature -4°F (-20°C) to 140°F (60°C)
Humidity Range5% to 90% RH (no condensation)

DIMENSIONS

Mounting Furniture Mount Support
Height x Width x Depth (Single Unit ) Millimeters: 110 x 96 x 25 Inches: 4.33 x 3.78 x 1
Height x Width x Depth (Packaged Unit) Millimeters: 193 x 136 x 41 Inches: 7.6 x 5.35 x 1.62
Weight (Single Unit) 0.5 lbs (0.23 kg)
Weight (Packaged Unit) 0.85 lbs (0.38 kg)
Product Warranty 5 Years

*Specifications are subject to change without notice. Mass and dimensions are approximate.

First-of-its-kind PoE Dante eARC encoder
Power over Ethernet (PoE) compatible; also by an included 5V PSU
Dante™ and AES67 multicast system compatible
CEC-through-TV remote volume control of a Dante-enabled amplifier
Audio remains in the digital domain until lossless conversion for playback
Second Coax/TOSLINK digital input with signal sense switching

SKU: ACP-DANTE-ETV

PoE-powered and compact dimensions for easy placement options
First-of-its-kind eARC to Dante encoder makes TV audio distribution, especially from TV Apps, easy to distribute
Signal remains in the digital domain until converted for100% lossless, accurate full frequency response encoding accuracy
CEC enables the local zone TV remote to control the volume. There is no need for extensive third-party programming or additional control devices.
Signal sensing switching between eARC signal and secondary digital input

Brand:
AudioControl

2-Channel eARC DANTE™ Encoder

eARC DANTE™ Encoder

The first-of-its-kind AudioControl AC-DANTE-ETV eARC-to-Dante encoder connects PCM Stereo PCM-configured video Display audio from a local TV zone with any Dante-enabled device located on the same network for site-wide distribution.

Ultra-compact and PoE-powered, the AC-DANTE-ETV deftly fits behind the sleekest flat panel and encodes digital eARC TV audio into Dante, maintaining the signal in the digital domain and making it available to networked Dante devices. Industry-standard sampling rates from 44.1 kHz to as high as 96 kHz in 16-, 24-, or 32-bit word lengths are converted into analog with zero impact on audio fidelity and with imperceptible delay for unified, coherent site-wide playback.

CEC enables users to control volume levels using the TV remote from the locally zoned display. A second digital input, selectable between Coaxial and TOSLINK inputs, switches between eARC and a second digital audio source.

Dante Controller, downloadable free from Audinate, is required to perform initial configuration, encoding parameters, Dante stream subscriptions, network settings, and AES67 audio support adjustments. For static installations, these may be set-and-forget adjustments. When powered and connected to a Dante network, the AC-DANTE-ETV is auto-discovered for easy identification.